Assessment of dietary background exposure of the Irish adult population to dioxins and PCBs particularly taking into account additional exposure due to the 2008 Irish dioxin food contamination incident

Irish monitoring data on PCDD/Fs, DL-PCBs and Marker PCBs were collated and combined with Irish Adult Food Consumption Data, to estimate dietary background exposure of Irish adults to dioxins and PCBs. Furthermore, all available information on the 2008 Irish pork dioxin food contamination incident was collated and analysed with a view to evaluate any potential impact the incident may have had on general dioxin and PCB background exposure levels estimated for the adult population in Ireland. The average upperbound daily intake of Irish adults to dioxins Total WHO TEQ (2005) (PCDD/Fs & DLPCBs) from environmental background contamination, was estimated at 0.3 pg/kg bw/d and at the 95th percentile at 1 pg/kg bw/d. The average upperbound daily intake of Irish adults to the sum of 6 Marker PCBs from environmental background contamination ubiquitous in the environment was estimated at 1.6 ng/kg bw/d and at the 95th percentile at 6.8 ng/kg bw/d. Dietary background exposure estimates for both dioxins and PCBs indicate that the Irish adult population has exposures below the European average, a finding which is also supported by the levels detected in breast milk of Irish mothers. Exposure levels are below health based guidance values and/or Body Burdens associated with the TWI (for dioxins) or associated with a NOAEL (for PCBs). Given the current toxicological knowledge, based on biomarker data and estimated dietary exposure, general background exposure of the Irish adult population to dioxins and PCBs is of no human health concern. In 2008, a porcine fat sample taken as part of the national residues monitoring programme led to the detection of a major feed contamination incidence in the Republic of Ireland. The source of the contamination was traced back to the use of contaminated oil in a direct-drying feed operation system. Congener profiles in animal fat and feed samples showed a high level of consistency and pinpointed the likely source of fuel contamination to be a highly chlorinated commercial PCB mixture. To estimate additional exposure to dioxins and PCBs due to the contamination of pig and cattle herds, collection and a systematic review of all data associated with the contamination incident was conducted. A model was devised that took into account the proportion of contaminated product reaching the final consumer during the 90 day contamination incident window. For a 90 day period, the total additional exposure to Total TEQ (PCDD/F &DL-PCB) WHO (2005) amounted to 407 pg/kg bw/90d at the 95th percentile and 1911 pg/kg bw/90d at the 99th percentile. Exposure estimates derived for both dioxins and PCBs showed that the Body Burden of the general population remained largely unaffected by the contamination incident and approximately 10 % of the adult population in Ireland was exposed to elevated levels of dioxins and PCBs. Whilst people in this 10 % cohort experienced quite a significant additional load to the existing body burden, the estimated exposure values do not indicate approximation of body burdens associated with adverse health effects, based on current knowledge. The exposure period was also limited in time to approximately 3 months, following the FSAI recall of contaminated meat immediately on detection of the contamination. A follow up breast milk study on Irish first time mothers conducted in 2009/2010 did not show any increase in concentrations compared to the study conducted in 2002. The latter supports the conclusion that the majority of the Irish adult population was not affected by the contamination incident.

Climate change and food safety: A review

Climate change and variability may have an impact on the occurrence of food safety hazards at various stages of the food chain, from primary production through to consumption. There are multiple pathways through which climate related factors may impact food safety including: changes in temperature and precipitation patterns, increased frequency and intensity of extreme weather events, ocean warming and acidification, and changes in contaminants’ transport pathways among others. Climate change may also affect socio-economic aspects related to food systems such as agriculture, animal production, global trade, demographics and human behaviour which all influence food safety. This paper reviews the potential impacts of predicted changes in climate on food contamination and food safety at various stages of the food chain and identifies adaptation strategies and research priorities to address food safety implications of climate change. The paper concludes that there is a need for intersectoral and international cooperation to better understand the changing food safety situation and in developing and implementing adaptation strategies to address emerging risks associated with climate change.

Biosensors for the analysis of microbiological and chemical contaminants in food

Increases in food production and the ever-present threat of food contamination from microbiological and chemical sources have led the food industry and regulators to pursue rapid, inexpensive methods of analysis to safeguard the health and safety of the consumer. Although sophisticated techniques such as chromatography and spectrometry provide more accurate and conclusive results, screening tests allow a much higher throughput of samples at a lower cost and with less operator training, so larger numbers of samples can be analysed. Biosensors combine a biological recognition element (enzyme, antibody, receptor) with a transducer to produce a measurable signal proportional to the extent of interaction between the recognition element and the analyte. The different uses of the biosensing instrumentation available today are extremely varied, with food analysis as an emerging and growing application. The advantages offered by biosensors over other screening methods such as radioimmunoassay, enzyme-linked immunosorbent assay, fluorescence immunoassay and luminescence immunoassay, with respect to food analysis, include automation, improved reproducibility, speed of analysis and real-time analysis. This article will provide a brief footing in history before reviewing the latest developments in biosensor applications for analysis of food contaminants (January 2007 to December 2010), focusing on the detection of pathogens, toxins, pesticides and veterinary drug residues by biosensors, with emphasis on articles showing data in food matrices. The main areas of development common to these groups of contaminants include multiplexing, the ability to simultaneously analyse a sample for more than one contaminant and portability. Biosensors currently have an important role in food safety; further advances in the technology, reagents and sample handling will surely reinforce this position.

Benefits from safer animal food products: preliminary results from a contingent valuation study of Italian households

The social cost of food scares has been the object of substantial applied research worldwide. In Italy, meat and dairy products are often the vectors of food-borne pathogens, and this is well known by the public. Most cases of food contamination and poisoning find their causes in the way food is handled after, rather than before purchase. However, a large fraction is still caused by mishandling at the industrial stage. With this in mind, we set out to estimate Italian households’ willingness to pay (WTP) for a reduction in the risk of meat and dairy food contamination using contingent valuation. The survey design incorporated features specifically conceived to overcome difficulties faced in previous survey research, especially with respect to individualized food expenditures and risk communication. In order to achieve this objective a CAPI (computer-assisted personal interview) survey was devised to tackle two major issues which emerged in previous contingent valuation studies. The first issue is connected to the way of communicating risk to consumers in order to allow them to make optimal choices and the second one to the results deriving from these studies. In fact, estimates from contingent valuation regarding food safety are given just for single products and so marketers may find it hard to extrapolate them to the aggregate. Our results show that in Italy there are segments of consumers who would benefit from higher standards of food safety for farm animal products.

Arsenic and heavy metal contamination of rice, pulses and vegetables grown in Samta village, Bangladesh

Arsenic contaminated water from tube wells has become the major health problem threatening millions of people in Bangladesh. However, the arsenic (As) contaminated water is not just used for drinking, it is used to irrigate crops, and to wash and prepare food. Contamination of agricultural soils by long-term irrigation with As contaminated water can lead to contamination and phyto-accumulation of the food crops with As and other toxic metals. As a consequence, dietary exposure to As and other toxic metals may contribute substantially to the adverse health effects caused by the contaminated tube wells in Bangladesh. Various vegetables, rice, pulses and the grass pea were sampled in Samta village in the Jessore district of Bangladesh and screened for As, Cd, Cu, Pb and Zn by inductively coupled plasma atomic emission spectrometry and inductively coupled plasma mass spectrometry. These local food crops provide the majority of the nutritional intake of the people in this area and are of great importance to their overall health. In general, our data show the potential for some vegetables to accumulate heavy metals with concentrations of Pb greater than Cd. The concentrations of As and Cd were higher in vegetables than in rice and pulses. The concentration of Pb was generally higher in rice than in pulses and vegetables. However, some vegetables such as bottle ground leaf, ghotkol, taro, eddoe and elephant foot had much higher concentrations of Pb. Other leafy and root vegetables contained higher concentrations oJ2n and Cu. Rice grown at Samta had increased Pb and As, but, considering an average daily intake of only 260 g rice per person per day, only the Pb is at concentrations which would be a health hazard/or human consumption.

Occurrence of Yersinia spp. in food in Brazil

Over the past 9 years, 468 bacterial strains isolated from raw and pasteurized milk, beef and pork, bovine and chicken liver, chicken heart, gizzards and lung sausage, hamburger, cheese and lettuce in different regions of the State of Sao Paulo and in the city of Rio de Janeiro were received by the Reference Laboratory for Yersinia in Brazil. All were confirmed to be Yersinia spp. The 468 Yersinia isolates were grouped as 184 strains because some of the bacteria isolated from the same food sample belonged to the same species, and were considered to be a single strain. The Yersinia food strains were classified as Y. enterocolitica (46), Y. intermedia (67), Y. frederiksenii (20), Y. kristensenii (8) and 43 of them were biochemically atypical. Pathogenic types were not detected.

Hurdles at work: perceptions of hospital food handlers

Abstract Background Food handlers have a very important role in preventing food contamination during its preparation and distribution. This responsibility is even greater in hospitals, since a large number of patients have low immunity and consequently food contamination by pathogenic bacteria could be particularly harmful. Therefore, a good working environment and periodic training should be provided to food handlers by upper management. Methods This study is qualitative research by means of focus group and thematic content analysis methodologies to examine, in detail, the statements by food handlers working in the milk and specific-diet kitchens in a hospital to understand the problems they face in the workplace. Results We found that food handlers are aware of the role they play in restoring patients' health; they consider it important to offer a good-quality diet. However, according to their perceptions, a number of difficulties prevent them from reaching this aim. These include: upper management not prioritizing human and material resources to the dietetic services when making resource allocation decisions; a perception that upper management considers their work to be of lesser importance; delayed overtime payments; lack of periodic training; managers lacking administrative skills; insufficient dietitian staff assistants, leading to overwork, at the same time as there is an excess of dietitians; unhealthy environmental working conditions – high temperature, high humidity, loud and constant noise level, poor ventilation; lack of food, and kitchen utensils and equipment; and relationship conflicts with chief dieticians and co-workers. Conclusion From these findings, improvement in staff motivation could be achieved by considering non-financial incentives, such as improvement in working conditions and showing appreciation and respect through supervision, training and performance appraisal. Management action, such as investments in intermediary management so that managers have the capacity to provide supportive supervision, as well as better use of performance appraisal and access to training, may help overcome the identified problems.

Food tampering : FDA's actions on Chilean fruit based on sound evidence : report to the ranking minority member, Committee on Foreign Relation, U.S. Senate.

Cover title.

Household and stored-food insects of public health importance and their control /

"May 1963"--T.p. verso.

The safety of food imports : hearing before the Permanent Subcommittee on Investigations of the Committee on Governmental Affairs, United States Senate, One Hundred Fifth Congress, second session.

"September 10, 24, and 25, 1998"--Pts. 3 and 4.

Risk assessment of exposure to multiple mycotoxins in food

Moulds may produce a diversity of toxins such as aflatoxins, ochratoxins, trichothecenes, zearalenone, fumonisins and others. Although toxicological, environmental and epidemiological studies have addressed the problem of these toxins one by one, more than one mycotoxin are found usually in the same contaminated food. Risk assessment for humans potentially exposed to multimycotoxins suffers very much from the lack of adequate food consumption data. Furthermore, for a given mycotoxin, synergism and antagonism with other mycotoxins, found in the same food commodities, are not taken into account. Aflatoxin B1 and ochratoxin A belong to the most frequently occurring mycotoxins. This has repeatedly been demonstrated, however, normally, the risk resulting from their simultaneous occurrence is not considered. A descriptive study was developed to monitor air fungal contamination in one hospital food unit.

Development of a log-quadratic model to describe microbial inactivation, illustrated by thermal inactivation of Clostridium botulinum

In the commercial food industry, demonstration of microbiological safety and thermal process equivalence often involves a mathematical framework that assumes log-linear inactivation kinetics and invokes concepts of decimal reduction time (DT), z values, and accumulated lethality. However, many microbes, particularly spores, exhibit inactivation kinetics that are not log linear. This has led to alternative modeling approaches, such as the biphasic and Weibull models, that relax strong log-linear assumptions. Using a statistical framework, we developed a novel log-quadratic model, which approximates the biphasic and Weibull models and provides additional physiological interpretability. As a statistical linear model, the log-quadratic model is relatively simple to fit and straightforwardly provides confidence intervals for its fitted values. It allows a DT-like value to be derived, even from data that exhibit obvious "tailing." We also showed how existing models of non-log-linear microbial inactivation, such as the Weibull model, can fit into a statistical linear model framework that dramatically simplifies their solution. We applied the log-quadratic model to thermal inactivation data for the spore-forming bacterium Clostridium botulinum and evaluated its merits compared with those of popular previously described approaches. The log-quadratic model was used as the basis of a secondary model that can capture the dependence of microbial inactivation kinetics on temperature. This model, in turn, was linked to models of spore inactivation of Sapru et al. and Rodriguez et al. that posit different physiological states for spores within a population. We believe that the log-quadratic model provides a useful framework in which to test vitalistic and mechanistic hypotheses of inactivation by thermal and other processes. Copyright © 2009, American Society for Microbiology. All Rights Reserved.